|
Product Description |
This varnish is resistant to UV rays and friction. It also does not fade and turn yellow over time. It gives colors a vibrant look. It is a clear in color and solvent based product. |
|
Product Number |
104-3 |
|
Areas of Application |
• Pool sides, touristic facilities, sea shore walking paths,
• Villas, sub divisions, and condominiums,
• Pedestrian walks, sidewalks, parks, underground passages,
• Parking garages, auto service centers, and gas stations,
• Convention Centers, Malls, Commerce buildings, and all concrete surfaces |
|
Product Advantages |
• Creates a surface free of cracks, with a protecting wax that will shine continuously
• It will maintain the aged look surfaces
• Will protect from wear due to friction and UV rays.
• Will stop carbonization, and is resistant to freeze.
• Has a low water and oil absorption rate. Also is resistant to chemicals.
• By penetrating deep into the concrete enhances the surface strength. |
|
Technical Data |
|
Color |
Clear |
|
Look |
Clear Liquid |
|
Packaging |
20 kg buckets |
|
Density |
0.95 kg/lt |
|
Consumption |
Approximately 0,200-0,300 kg/m² |
|
Drying time |
Approximately 2 hours |
|
Storage |
In cool and dry areas shelf life is about 12 months. |
|
Applicators |
A brush and a mechanical sprayer |
|
Caution |
Flammable (R10) |
|
|
Application |
Before the application the surface must be cleaned and dust free. The surface must be dry. First layer of CVC CURE UVS (Protecting Varnish) must be applied with a sprayer or brush. Do not use a paint roller.
After the first layer is completely dry the second layer of CVC CURE UVS can be applied.
After the second layer is completely dry (approx. 2 hours) the surface can be used
. |
|
Points to Pay Attention |
• Never apply on wet and frozen surfaces
• It is flammable (R10), Keep away from fire and do not smoke.
• Do not inhale. On skin contact might create a rash. Do not swallow.
• Apply only in well ventilated areas. |
