630-CVC PRIMER AC

General Purpose Primer

Product Description	It is an SBR, water-based, one-component and general purpose emulation which is used for ensuring a good adhesion. It is a primer material which is applied on the surface in order to ensure adhesion before cement based applications such as leveling alum, tile and ceramic adhesives, repair mortar, grout mortar etc.
Product Number	630
Areas of Application	• In order to prevent air bubbles and increase the adherence to floor on the leveling alum and similar alum applications, • In order to protect absorbent surfaces such as gypsum plaster, chipboard, gas concrete, plaster and wall boards against moisture, • In order to prevent cracks which are possible to occur as the surface lose water quickly before gypsum plaster • To apply an undercoat to gypsum plaster, chipboard, gas concrete, plaster, lime staff and brick walls • In order to prevent the adhesive mortar from quick loss of water before the application of tile, ceramic or marble and to prevent covering from peeling off over time, • In order to ensure dust-freeness on industrial floors and under the coverings which are raised, • In order to ensure dust-freeness and anti-slip by being applied under carpets, • As an primer before wall paper and paint applications
Product Advantages	• Economical, • Odor-free, • Easy to use, • Water based and non-solvent, • Ensures isolation by settling in pores, • May be used to ensure dust-freeness on screed surfaces, • Appropriate for the places with under-floor heating
Technical Data	Packaging In plastic cans of 10 kg and 30 kg Appearance White Application Surface temperature +5 °C and +30 °C Consumption      80-175 gr/m² (variable depending on surface status) Drying time 2-8 hours (variable depending on environmental conditions) Application Equipment Sponge roller and brush Cleaning Equipments should be cleaned with water right after the usage Storage Its shelf life is approximately 12 months in a cool and dry place.  It is sensitive to frost.
Application	The surface should be dry and free of dust, oil, dirt and moving particles. CVC PRIMER AC is equally applied to floor by means of thin sponge roller or brush and left for drying. Drying time may vary according to weather conditions and the state of floor. The application area should be protected against frost.